MSI MS-6577 CHIPSET DRIVER DOWNLOAD

Static electricity may damage the components. If you do not find the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. Something wrong because do not communicate with monitor. You can attach a serial mouse or other serial devices to this port. JSP1 This connector is used to connect the internal speaker if available. Well, it did not work for me.

Uploader: Vudole
Date Added: 3 October 2006
File Size: 21.86 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 51610
Price: Free* [*Free Regsitration Required]

Press the CPU down firmly into the socket and close the lever. Floppy Disk Drive Connector: This item doesn’t belong on this page. You can connect a network chipsey to the LAN jack.

MSi MS-6577 Manuals

Position the heatsink onto the reten- mechanism on the motherboard. Well, it did not work for me. HP MS Version 4. Removal and replacement were ms-6757 and all components functioned properly. Something wrong because do not communicate with monitor Verified purchase: That battery has long life time for at least 5 years. Use a grounded wrist strap before handling computer components.

MSI Xenon, Socket 478, Intel (MS-6577) Motherboard

I am now able to retrieve and save all of my pictures and important documents that would have cost much more to have retrieved elsewhere. Always chipaet the vendor for proper CPU cooling fan.

  CANON IP2200 MAC DRIVER

It supports three-pin head connector. Onboard Peripherals h Onboard peripherals include: X Micro ATX mainboard. Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board.

For some components, if you install in the wrong orientation, the components will not work properly. To mss-6577 the fiber-optic cable to optical SPDIF jack, you need to remove the plug from the jack first. Please turn off the power and unplug the power cord before installing the CPU. Press the two levers down to fasten Press down the fan until its four clips get wedged in the holes of the retention mechanism.

It was certainly cheaper than replacing the computer, even if it only continues to work for another year. About this product Product Identifiers Brand. The CPU can only fit in the correct orientation. Chipse, read the documentation for the expansion card to make any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration. These connectors support the provided IDE hard disk cable.

MSI Ms Ver Socket Motherboard With I/o Plate | eBay

The computer was great but the motherboard went south, so I searched for a used motherboard. I plugged in all the components from the old motherboard, swapped the processor and memory over and within 20 to 30 minutes the computer was operating again.

  BUFFALO G54 PCMCIA DRIVER

It introduces a 66MHz, bit channel for the graphics controller to directly access main memory and provides three levels of throughputs: If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen.

Locate the CPU and its retention 2.

MSI Xenon, Socket , Intel (MS) Motherboard | eBay

Then push down the power supply firmly into the connector. Overheating Overheating will seriously damage the CPU and system, always make sure the cooling fan can work properly to protect the CPU from overheating.

You may also like. The number of pins on either side of the breaks are different.